Honeywell Galaxy 2 Series Installation Manual page 88

56 - Comms (cont'd)
01 Format
The communicator provides three signalling formats:
• DTMF
• SIA
• Contact ID
Once the format has been selected, the alarm and event triggers that the panel will transmit to the ARCs, may
be programmed.
1 = DTMF (Dual tone Multiple Frequency)
DTMF is the fast format. When DTMF format is selected, the operation of the dialler is similar to that of a
hardwired 8-channel communicator.
Programming Channels
On selecting DTMF, the keypad displays 1 = Channels 1 – 8. All eight channels can be individually pro-
grammed. To access the Channels option press the ent key; the programming details of the first channel are
displayed. Select the required channel using the A and B keys or by entering the channel number directly and
press the ent key.
Channel
Polarity
1 = Channels 1-8
Each channel can be programmed with the following attributes:
1 = Function
Any of the system output functions (see option 53 = Outputs) can be assigned to each of the channels
1 – 8. Channel 3 defaults to output function 04 = INTRUDER. Channel 5 defaults to 32=OMIT.
Channel 7 defaults to 20 = CONFIRM. All other channels default to 0 = NOT USED. Select the
required output function using the A and B keys or by entering the function number directly. Once the
required function is displayed, press the ent key to assign the function to the selected channel. For
example, a PA function programmed on channel 2 results in a PA code to be transmitted on channel 2 to
the ARC when there is a PA alarm activation.
2 = Not used
3 = Not used
Galaxy 2 Series Installation Manual
Channel Output Function
CH03 INTRUDER CH03 INTRUDER
CH03 INTRUDER CH03 INTRUDER CH03 INTRUDER
POS POS POS POS POS
Groups assigned
1234 1234 1234 1234 1234
80