Rear Suspension Factory Settings - Can-Am DS 450 X mx Operator's Manual

TUNE YOUR RIDE
To adjust compression and rebound,
proceed as follows:
1. Turn adjuster clockwise until it
stops.
2. Turn adjuster counter clockwise by
the specified amount, see table be-
low.
FRONT SUSPENSION FACTORY
SETTINGS
Spring preload
Compression
damping
(low speed)
Compression
damping
(high speed)
Rebound damping
Rear Suspension Factory
Settings
For adjustment procedures,
SUSPENSION
to
GUIDELINE
and
ADJUSTMENTS
To adjust compression and rebound,
proceed as follows:
1. Turn adjuster clockwise until it
stops.
2. Turn adjuster counter clockwise by
the specified amount, see table be-
low.
______________
78
325 mm (12.8 in)
12 clicks
1-1/2 turn
11 clicks
ADJUSTMENTS
REAR SUSPENSION
in this section.
REAR SUSPENSION FACTORY
Spring preload
Compression
damping
(low speed)
Compression
damping
(high speed)
Rebound damping
refer
SETTINGS
285 mm (11.22 in)
7 clicks
1-1/2 turn
5 clicks