10) Tool Kit; 11) Seat Latch - Can-Am DS 450 X mx Operator's Manual

CONTROLS/INSTRUMENT/EQUIPMENTS

10) Tool Kit

The tool kit is located in the service
compartment underneath seat.
vmo2008-011-029_a
1. Tool kit
The tool kit contains tools for basic
maintenance.

11) Seat Latch

Located underneath rear end of seat.
It allows the removal of seat to give
access to air filter housing and service
compartment.
vmo2009-023-002_c
1. Seat latch
______________
62
Seat Removal
Pull latch rearward while gently lifting
rear of seat. Continue lifting move-
ment until you can release seat retain-
ing devices, then completely remove
seat.
vmo2008-011-030_a
1. Seat latch
Seat Installation
Insert seat front upper slot into coolant
tank hook, then make sure seat middle
tab is well engaged. When seat rests
in its position, firmly push seat down to
latch.
NOTE: A distinctive snap will be felt.
Double check that the seat is secure by
giving it a tug to confirm proper latch-
ing.
vmo2008-011-031_a
1. Upper slot
2. Middle tab