Can-Am DS 450 X mx Operator's Manual page 95

Engine Coolant Replacement
WARNING
In order to avoid potential burns,
do not remove the coolant tank cap
or loosen the engine drain plug if
the engine is hot.
Remove access cover, refer to
GINE COOLANT LEVEL
Turn the coolant tank cap counterclock-
wise and remove it.
vmo2008-011-032_a
UNDERNEATH ACCESS COVER
1. Coolant tank cap
Unscrew the drain plug slowly and
drain the coolant into a suitable con-
tainer.
NOTE: It is not necessary to remove
drain plug.
EN-
in this section.
_______________
MAINTENANCE PROCEDURES
vmo2008-011-042_b
LH SIDE OF ENGINE
1. Coolant drain plug
Drain completely and retighten the
drain plug.
Loosen gear clamp from radiator outlet
hose.
Remove outlet hose from radiator to
drain the system completely.
vmo2008-011-086_a
1. Gear clamp
2. Outlet hose
3. Radiator
Reinstall hose and secure with gear
clamp.
Wipe off any coolant spillage on frame
and engine.
Refill coolant
(1.9 qt (U.S. liq.))
coolant. Refer to
more details.
tank with
of recommended
SPECIFICATIONS
1.8 L
for
93