Suspension Factory Settings; Spring Preload Adjustment - Can-Am MAVERICK X3 Series 2017 Operator's Manual

219001761-040_b
TYPICAL - MAVERICK X3 X DS AND X RS
MODELS - FRONT SUSPENSION
1. Compression damping (high speed and low
speed)
2. Preload
3. Spring Crossover
4. Rebound damping
219001761-039_a
TYPICAL - MAVERICK X3 X DS MODELS -
REAR SUSPENSION
1. Compression damping (high speed and low
speed)
2. Preload
3. Spring Crossover
4. Rebound damping
ADJUSTMENT
Spring preload
Compression damping
Compression damping
(low speed)
Compression damping
(high speed)
FRONT SUSPENSION FACTORY SETTINGS
MODEL
Maverick X3
Maverick X3 X ds
Maverick X3 X rs
Maverick X3
Maverick X3 X ds
Maverick X3 X rs
Maverick X3 X ds
Maverick X3 X rs
_______________
219001761-041_a
TYPICAL - MAVERICK X3 X RS MODELS -
REAR SUSPENSION
1. Compression damping (high speed and low
speed)
2. Preload
3. Spring Crossover
4. Rebound damping
Suspension Factory
Settings
For adjustment procedures, refer to

SPRING PRELOAD ADJUSTMENT

(FRONT AND REAR)
DAMPING ADJUSTMENTS (FRONT
AND REAR)
in this section.
To adjust compression and rebound to
factory settings, proceed as follows:
1. Turn adjuster clockwise until it
stops.
2. Turn adjuster counterclockwise by
the specified amount, see table be-
low.
FACTORY SETTING
TUNE YOUR RIDE
SHOCK
and
36.8 mm (1.45 in)
38.5 mm (1.52 in)
53 mm (2.09 in)
Position 2
2 Turns
2 Turns
2 Turns
3 Turns
63