Suspension Factory Settings - Can-Am 2009 DS 450 Operator's Manual

TUNE YOUR RIDE
vmo2008-011-079_a
SPRING LENGTH — FACTORY SETTING
A. 262 mm (10 in)
Compression Damping
Use a flat screwdriver to adjust it.
vmo2008-011-060_a
1. Compression adjuster (flat screwdriver)
Turning it clockwise (H) increases
shock damping action (stiffer).
Turning it counterclockwise (S) de-
creases shock damping action (softer).
Rebound Damping
Use a flat screwdriver to adjust it.
______________________
74
vmo2008-011-077_a
1. Rebound adjuster (flat screwdriver)
Turning it clockwise (H) increases
shock damping action (stiffer).
Turning it counterclockwise (S) de-
creases shock damping action (softer).
Suspension Factory
Settings
If for any reasons you need to readjust
front and/or rear suspension to factory
settings, adjust as follows.
Front Suspension
Spring Preload
Lift the front of the vehicle. Spring
length should be measured without
load on the wheels.
vmo2008-011-056_a
SPRING LENGTH — FACTORY SETTING
A. 282 mm (11 in)