Table of Contents
Advertisement
Removing the Coin-Cell Battery
WARNING: Before working inside your computer, read the safety information that shipped with
your computer and follow the steps in
inside your computer, follow the instructions in
safety best practices, see the Regulatory Compliance home page at dell.com/
regulatory_compliance.
CAUTION: Removing the coin-cell battery resets the BIOS settings to default. It is recommended
that you note the BIOS settings before removing the coin-cell battery.
Prerequisites
1.
Replace the
stand
assembly.
2.
Replace the
back
cover.
3.
Replace the
system-board
Procedure
CAUTION: Removing the coin-cell battery resets the BIOS settings to default. It is recommended
that you note the BIOS settings before removing the coin-cell battery.
1.
Locate the coin-cell battery socket on the system board. For more information, see
Components.
2.
Using a plastic scribe, press the securing clip away from the coin-cell battery until the coin-cell
battery pops out.
1.
plastic scribe
3.
coin-cell battery
34
Before Working Inside Your
shield.
Computer. After working
After Working Inside Your
2.
securing clip
Computer. For more
System Board
Advertisement
Table of Contents
