Table of Contents
Advertisement
1.
power-supply fan
3.
power-supply fan cable
Replacing the Power-Supply Fan
WARNING: Before working inside your computer, read the safety information that shipped with
your computer and follow the steps in
inside your computer, follow the instructions in
safety best practices, see the Regulatory Compliance home page at dell.com/
regulatory_compliance.
Procedure
1.
Connect the power-supply fan cable to the power-supply unit.
2.
Align the screw holes on the power-supply fan with the screw holes on the display-panel base.
3.
Replace the screws that secure the power-supply fan to the display-panel base.
4.
Align the screw holes on the power-supply fan bracket with the screw holes on the display-panel
base.
5.
Replace the screw that secures the power-supply fan bracket to the display-panel base.
Post-requisites
1.
Replace the
I/O
bracket.
2.
Replace the
power-supply diagnostic
3.
Replace the
VESA-mount
4.
Replace the
system-board
5.
Replace the
back
cover.
6.
Replace the
stand
assembly.
Before Working Inside Your
board.
bracket.
shield.
2.
screws (2)
Computer. After working
After Working Inside Your
Computer. For more
41
Advertisement
Table of Contents
