Table of Contents
Advertisement
Procedure
1.
Align and place the system-board shield on the display-panel base.
2.
Slide the tabs on the system-board shield into the slots on the display-panel base until it snaps into
place.
Post-requisites
1.
Replace the
back
cover.
2.
Replace the
stand
assembly.
Removing the Hard Drive
WARNING: Before working inside your computer, read the safety information that shipped with
your computer and follow the steps in
inside your computer, follow the instructions in
safety best practices, see the Regulatory Compliance home page at dell.com/
regulatory_compliance.
CAUTION: Hard drives are fragile. Exercise care when handling the hard drive.
CAUTION: To avoid data loss, do not remove the hard drive while the computer is in Sleep or On
state.
Prerequisites
1.
Remove the
stand
2.
Remove the
back
cover.
3.
Remove the
system-board
Procedure
1.
Press down on the hard-drive bracket and slide the hard-drive assembly to release it from the hard-
drive cage.
2.
Lift the hard-drive assembly off the hard-drive cage.
Before Working Inside Your
assembly.
shield.
Computer. After working
After Working Inside Your
Computer. For more
23
Advertisement
Table of Contents
