Dell vostro 23-3340 Owner's Manual page 77

Option
Deep Sleep Control
Fan Control Override
USB Wake Support
Wake on LAN / WLAN
Block Sleep
Intel Smart Connect
Technology
Table 7. POST Behavior
Option
Numlock LED
Keyboard Errors
Fastboot
Description
(hour:minutes:seconds). The startup time can be changed by typing the
values in the time and A.M./P.M. fields.
• Disabled - The system will not automatically power up. This option is
selected by default.
• Every Day - The system will power up every day at the time you
specified above .
• Weekdays - The system will power up Monday through Friday at the
time you specified above.
• Select Days - The system will power up on days selected above at the
time you specified above.
NOTE: This feature does not work if you turn off your computer using
the switch on a power strip or surge protector or if Auto Power is set
to disabled.
Allows you to define the controls when Deep Sleep is enabled.
• Disabled
• Enabled in S5 only
• Enabled in S4 and S5– This option is enabled by default.
Controls the speed of the system fan. This option is disabled by default.
NOTE: When enabled, the fan runs at full speed.
This option allows you to enable USB devices to wake the computer from
standby.
• Enable USB Wake Support - This option is enabled by default.
This option allows the computer to power up from the off state when
triggered by a special LAN signal. Wake-up from the Standby state is
unaffected by this setting and must be enabled in the operating system.
This feature only works when the computer is connected to AC power
supply. This option is disabled by default.
This option lets you block entering to sleep (S3 state) in operating system
environment.
• Block Sleep (S3 state) - This option is disabled by default.
This option is disabled by default. If this option is enabled, the feature will
periodically sense the nearby wireless connection while the system is
asleep. The Smart Connect will synchronize the email or social media
applications that are open, when the computer enters the sleep state.
Description
Specifies if the NumLock function can be enabled when the system boots.
This option is enabled by default.
Specifies whether keyboard related errors are reported when it boots. This
option is enabled by default.
Speeds up the boot process by bypassing some compatibility steps. The
options are:
77