Table of Contents
Advertisement
Replacing the Camera
WARNING: Before working inside your computer, read the safety information that shipped with
your computer and follow the steps in
inside your computer, follow the instructions in
safety best practices, see the Regulatory Compliance home page at dell.com/
regulatory_compliance.
Procedure
1.
Connect the camera cable to the camera module.
2.
Align the screw hole on the ground cable and the camera module with the screw hole on the display
bezel.
3.
Replace the screw that secures the ground cable and the camera module to the display bezel.
Post-requisites
1.
Follow the procedure from step 11 to step 17 in "Replacing the
2.
Replace the
system
3.
Replace the
coin-cell
4.
Replace the
wireless
5.
Replace the processor.
6.
Replace the
processor
7.
Replace the
processor
8.
Replace the
power-supply
9.
Replace the
power-supply
10. Replace the
optical
11. Replace the
I/O
bracket.
12. Replace the
power-supply diagnostic
13. Replace the
converter
14. Replace the
control buttons
15. Replace the
VESA-mount
16. Replace the
hard
drive.
17. Replace the
system-board
18. Replace the
memory
19. Replace the
back
cover.
20. Replace the
stand
assembly.
Removing the Antenna
WARNING: Before working inside your computer, read the safety information that shipped with
your computer and follow the steps in
inside your computer, follow the instructions in
safety best practices, see the Regulatory Compliance home page at dell.com/
regulatory_compliance.
54
Before Working Inside Your
board.
battery.
card.
fan.
heat-sink.
unit.
fan.
drive.
board.
board.
board.
bracket.
shield.
module(s).
Before Working Inside Your
Computer. After working
After Working Inside Your
Display
Panel".
Computer. After working
After Working Inside Your
Computer. For more
Computer. For more
Advertisement
Table of Contents
