Removing the Converter Board
WARNING: Before working inside your computer, read the safety information that shipped with
your computer and follow the steps in
inside your computer, follow the instructions in
safety best practices, see the Regulatory Compliance home page at dell.com/
regulatory_compliance.
Prerequisites
1.
Remove the
stand
2.
Remove the
back
cover.
Procedure
1.
Disconnect the converter-board cable and display-backlight cable from the connectors on the
convertor board.
2.
Remove the screws that secure the convertor board to the display-panel base.
3.
Lift the converter board off the display-panel base.
1.
screws (2)
3.
converter board
Replacing the Converter Board
WARNING: Before working inside your computer, read the safety information that shipped with
your computer and follow the steps in
inside your computer, follow the instructions in
safety best practices, see the Regulatory Compliance home page at dell.com/
regulatory_compliance.
28
Before Working Inside Your
assembly.
Before Working Inside Your
Computer. After working
After Working Inside Your
2.
display-backlight cable
4.
converter-board cable
Computer. After working
After Working Inside Your
Computer. For more
Computer. For more