Steps
1. Using the alignment posts, place the left and right speakers into their slots on the palm-rest assembly.
2. Route the speaker cable through the routing guides on the palm-rest assembly.
3. Connect the speaker cable to the system board.
Next steps
1. Install the
base
cover.
2. Install the
SIM
card.
3. Follow the procedure in
Coin-cell battery
Removing the coin-cell battery
Prerequisites
1. Follow the procedure in
2. Remove the
SIM
card.
3. Remove the
base
cover.
4. Remove the battery.
5. Remove the
assembly-inner
About this task
The following image(s) indicate the location of the coin-cell battery and provides a visual representation of the removal
procedure.
78
Removing and installing Field Replaceable Units (FRUs)
After working inside your
Before working inside your
frame.
computer.
computer.