Table of Contents
Advertisement
Procedure
1.
Slide the power port through the I/O bracket.
2.
Align the screw holes on the I/O bracket with the screw holes on the display-panel base.
3.
Replace the screws that secure the I/O bracket to the display-panel base.
4.
Align the screw holes on the power port with the screw holes on the I/O bracket.
5.
Replace the screws that secure the power port to the I/O bracket.
Post-requisites
1.
Replace the
power-supply diagnostic
2.
Replace the
VESA-mount
3.
Replace the
system-board
4.
Replace the
back
cover.
5.
Replace the
stand
assembly.
Removing the Optical Drive
WARNING: Before working inside your computer, read the safety information that shipped with
your computer and follow the steps in
inside your computer, follow the instructions in
safety best practices, see the Regulatory Compliance home page at dell.com/
regulatory_compliance.
Prerequisites
1.
Remove the
stand
2.
Remove the
back
cover.
3.
Remove the
system-board
4.
Remove the
VESA-mount
5.
Remove the
power-supply diagnostic
6.
Remove the
I/O
bracket.
Procedure
1.
Press the securing tab down and slide the optical-drive assembly to release it from the interposer.
board.
bracket.
shield.
Before Working Inside Your
assembly.
shield.
bracket.
board.
Computer. After working
After Working Inside Your
Computer. For more
37
Advertisement
Table of Contents
