Table of Contents
Advertisement
Replacing the Microphone
WARNING: Before working inside your computer, read the safety information that shipped with
your computer and follow the steps in
inside your computer, follow the instructions in
safety best practices, see the Regulatory Compliance home page at dell.com/
regulatory_compliance.
Procedure
1.
Connect the microphone cables to the microphones.
2.
Slide the microphones into the slots on the display bezel and make sure the securing tabs are in
position.
3.
Align the screw holes on the microphone brackets with the screw holes on the display bezel.
4.
Replace the screws that secure the microphone brackets to the microphones.
Post-requisites
1.
Replace the
back
cover.
2.
Replace the
stand
assembly.
Removing the Wireless Card
WARNING: Before working inside your computer, read the safety information that shipped with
your computer and follow the steps in
inside your computer, follow the instructions in
safety best practices, see the Regulatory Compliance home page at dell.com/
regulatory_compliance.
Prerequisites
1.
Remove the
stand
2.
Remove the
back
cover.
3.
Remove the
system-board
Procedure
1.
Disconnect the antenna cables from the connectors on the wireless card.
2.
Remove the screw that secures the wireless card to the system board.
3.
Slide and remove the wireless card out of the Mini Card slot on the system board.
32
Before Working Inside Your
Before Working Inside Your
assembly.
shield.
Computer. After working
After Working Inside Your
Computer. After working
After Working Inside Your
Computer. For more
Computer. For more
Advertisement
Table of Contents
