1.
VESA-mount bracket
Replacing the VESA-Mount Bracket
WARNING: Before working inside your computer, read the safety information that shipped with
your computer and follow the steps in
inside your computer, follow the instructions in
safety best practices, see the Regulatory Compliance home page at dell.com/
regulatory_compliance.
Procedure
1.
Align the screw holes on the VESA-mount bracket with the screw holes on the display-panel base.
2.
Replace the screws that secure the VESA-mount bracket to the display-panel base.
Post-requisites
1.
Replace the
system-board
2.
Replace the
back
cover.
3.
Replace the
stand
assembly.
Removing the Control-Buttons Board
WARNING: Before working inside your computer, read the safety information that shipped with
your computer and follow the steps in
inside your computer, follow the instructions in
safety best practices, see the Regulatory Compliance home page at dell.com/
regulatory_compliance.
Prerequisites
1.
Remove the
stand
2.
Remove the
back
cover.
26
Before Working Inside Your
shield.
Before Working Inside Your
assembly.
2.
screws (5)
Computer. After working
After Working Inside Your
Computer. After working
After Working Inside Your
Computer. For more
Computer. For more