Removing The Processor Heat-Sink; Prerequisites; Procedure - Dell vostro 23-3340 Owner's Manual

Removing the Processor Heat-Sink

WARNING: Before working inside your computer, read the safety information that shipped with
your computer and follow the steps in
inside your computer, follow the instructions in
safety best practices, see the Regulatory Compliance home page at dell.com/
regulatory_compliance.

Prerequisites

1. Remove the stand
2. Remove the back cover.
3. Remove the system-board
4. Remove the VESA-mount

Procedure

1. Loosen the captive screws that secure the processor heat-sink to the system board.
2. Remove the screw that secures the processor heat-sink to the display-panel base.
3. Peel off the Mylar from the processor heat-sink and fan.
4. Lift the processor heat-sink off the system board.
1. Mylar
3. processor heat-sink
44
Before Working Inside Your
assembly.
shield.
bracket.
Computer. After working
After Working Inside Your
2. screw
4. captive screws (4)
Computer. For more