1.
screws (4)
3.
speaker cable
Replacing the Speakers
WARNING: Before working inside your computer, read the safety information that shipped with
your computer and follow the steps in
inside your computer, follow the instructions in
safety best practices, see the Regulatory Compliance home page at dell.com/
regulatory_compliance.
Procedure
1.
Align the screw holes on the speakers with the screw holes on the display-panel base.
2.
Replace the screws that secure the speakers to the display-panel base.
3.
Route the speaker cables through the routing guide on the display-panel base.
4.
Connect the speaker cable to the system board.
Post-requisites
1.
Replace the
speaker
2.
Replace the
back
cover.
3.
Replace the
stand
assembly.
Removing the Memory Module(s)
WARNING: Before working inside your computer, read the safety information that shipped with
your computer and follow the steps in
inside your computer, follow the instructions in
safety best practices, see the Regulatory Compliance home page at dell.com/
regulatory_compliance.
18
Before Working Inside Your
cover.
Before Working Inside Your
2.
speakers (2)
Computer. After working
After Working Inside Your
Computer. After working
After Working Inside Your
Computer. For more
Computer. For more