Installing the I/O Board
1.
Place the I/O board in its slot.
2.
Tighten the screw to secure the I/O board to the computer.
3.
Connect the I/O cable to the I/O board.
4.
Install:
a) palmrest
b) keyboard
c) access panel
d) SD card
e) battery
After Working Inside Your Computer .
5.
Follow the procedures in
Removing the Coin-Cell Battery
Before Working Inside Your Computer .
1.
Follow the procedures in
2.
Remove:
a) battery
b) SD card
c) access panel
d) keyboard
e) palmrest
3.
Pry out the coin-cell battery from the system board.
Installing the Coin-Cell Battery
1.
Place the coin-cell battery in its slot.
2.
Install:
a) palmrest
b) keyboard
c) access panel
d) SD card
e) battery
After Working Inside Your Computer .
3.
Follow the procedures in
24