Gear Shaft; Pto Shaft; Rocker Arm Assembly - Kubota WG1605-G-E3 Workshop Manual

WG1605-G-E3,WG1605-L-E3,WG1605-GL-E3, WSM

[9] GEAR SHAFT

[10] PTO SHAFT

[11] ROCKER ARM ASSEMBLY

The gear shaft is a shaft that was changed from the
fuel camshaft for 05-E3B engine to the shaft with no
cam.
(1) Injection Pump Gear
(2) Stopper
(3) Ball Bearing
It is possible to takeoff the power of hydraulic pump
drive from the PTO shaft.
(1) Governor Gear
(2) Governor Gear Holder
(3) PTO Shaft
The rocker arm assembly includes the rocker arms
(2) and adjusting screws (1), the end of which rests on
the push rods, rocker arm brackets (4) and rocker arm
shaft (3).
The rocker arms
reciprocating motion of the push rods to the inlet and
exhaust valves to open and close them.
(1) Adjusting Screw
(2) Rocker Arm
1-M4
ENGINE
(4) Feather key
(5) Gear shaft
(6) Ball Bearing
9Y1210661ENM0009US0
(4) Bearing
(5) Snap Ring
9Y1210661ENM0031US0
swing and transmits
(3) Rocker Arm Shaft
(4) Rocker Arm Bracket
9Y1210318ENM0012US0
KiSC issued 01, 2012 A
the