Fuel System; General - Kubota WG1605-G-E3 Workshop Manual

WG1605-G-E3,WG1605-L-E3,WG1605-GL-E3, WSM

4. FUEL SYSTEM

[1] GENERAL

(1) Delivery Pipe
(2) Fuel Pressure Manifold (FPM)
(3) Fuel Pump
(4) Fuel Filter
(5) Gasoline Tank*
(6) Mixer
(7) Regulator (D-EPR)
WG1605-G-E3:
The fuel is fed from the gasoline tank (5) through the fuel filter (4) to the delivery pipe (1) by the fuel pump (3).
WG1605-L-E3:
The LPG fuel stored in the LPG tank (12) is sent to vaporizer (9) by pressure in the gaseous phase in the tank
through the lock off valve (10).
The LPG fuel is evaporated in vaporizer (9) and is sent to the regulator (7) as a gaseous fuel of gas pressure near
the atmospheric pressure.
The regulator (7) mixes the gas and air is supplied in the cylinder.
WG1605-GL-E3:
This fuel system has 2 ways (gasoline fuel and LPG fuel).
(8) Vapor Hose*
(9) Vaporizer (DSR)
(10) Lock Off Valve
(11) LPG Manual Valve*
(12) LPG Tank*
(13) Coolant Hose*
1-M12
[A] Gasoline Fuel
[B] LPG Fuel
(a) Gasoline Line*
(b) Bleed / Return Circuit*
(c) Gaseous Propane Line*
ENGINE
(d) Liquid Propane Line*
(e) Hot Coolant Inlet or Outlet
Line*
Component Marked * is Not
Provided by KUBOTA
9Y1210661ENM0016US0
KiSC issued 01, 2012 A