Kubota WG1605-G-E3 Workshop Manual page 108

WG1605-G-E3,WG1605-L-E3,WG1605-GL-E3, WSM
Valves
1. Remove the valve caps (2).
2. Remove the valve spring collet (3), pushing the valve spring
retainer (4) with valve spring replacer (1).
3. Remove the valve spring retainer (4), valve spring (5) and valve
stem seal (6).
4. Remove the valve (7).
(When reassembling)
• Wash the valve stem and valve guide hole, and apply engine oil
sufficiently.
• After installing the valve spring collets, lightly tap the stem to
assure proper fit with a plastic hammer.
IMPORTANT
• Do not change the combination of valve and valve guide.
(1) Valve Spring Replacer
(2) Valve Cap
(3) Valve Spring Collet
(4) Valve Spring Retainer
1-S30
ENGINE
(5) Valve Spring
(6) Valve Stem Seal
(7) Valve
9Y1210661ENS0022US0
KiSC issued 01, 2012 A