Maintenance Check List - Kubota WG1605-G-E3 Workshop Manual

WG1605-G-E3,WG1605-L-E3,WG1605-GL-E3, WSM

3. MAINTENANCE CHECK LIST

To maintain long-lasting and safe engine performance, make it a rule to carry out regular inspections by following
the table below. (The schedule applies to an engine in use under normal conditions.)
[WG1605-G-E3,WG1605-L-E3,WG1605-GL-E3]
Item
Checking engine oil level
Checking and replenish coolant
Checking air cleaner element
Cleaning air cleaner element
Checking LPG tank setting condition
Checking LPG fuel connector
Changing engine oil
Replacing oil filter cartridge
Checking gasoline fuel hose and clamp
bands
Checking LPG fuel hose and clamp bands
Cleaning spark plug
Checking fuel filter
Check fan belt tension and damage
Checking battery electrolyte level
Replacing fuel filter
Checking LPG tank setting condition
Checking radiator hoses and clamp bands
Checking PCV valve
Checking coolant hose of LPG vaporizer
Checking LPG Lock off valve
Checking valve clearance
Replacing spark plug
* Replacing air cleaner element
Replacing gasoline fuel hose, clamp bands
and fuel filter
Cleaning fuel tank inside (for gasoline fuel)
Cleaning water jacket and radiator interior
Replacing intake air line
Replacing breather hose
Replacing LPG fuel hose and clamp bands
Replacing coolant hose of LPG vaporizer
** Checking LPG vaporizer
Replacing radiator hoses and clamp bands
Changing radiator coolant
Replacing battery
Change engine oil and replace oil filter cartridge after the first 50 hours of operation.
*: Change more often when operating under dusty conditions.
**: If you do not have the proper tools and / or are not mechanically proficient, contact your local KUBOTA dealer.
CAUTION
• When changing or inspecting, be sure to level and stop the engine.
Every Every
Every
8 hrs 50 hrs
100 hrs
(Daily) (Weekly)
if
necessary
if
necessary
if
necessary
if
necessary
G-6
Service Interval
Every Every Every
200 hrs 1000 hrs 2000 hrs
GENERAL
Every Every
1 year 2 years
9Y1210661GEG0008US0
KiSC issued 01, 2012 A