Kubota WG1605-G-E3 Workshop Manual page 2

This Workshop Manual tells the servicing personnel about the mechanism, servicing and
maintenance of the WG1605-G-E3, WG1605-L-E3 and WG1605-GL-E3. It contains 4 parts:
"Information", "General", "Mechanism" and "Servicing".
Information
This section contains information below.
• Safety First
• Specification
• Important Items of Exhaust Emission Regulation
• Performance Curve
• Dimension
• Wiring Diagram
General
This section contains information below.
• Engine Identification
• General Precautions
• Maintenance Check List
• Check and Maintenance
• Special Tools
Mechanism
This section contains information on the structure and the function of the unit. Before you continue
with the subsequent sections, make sure that you read this section.
Servicing
This section contains information below.
• Troubleshooting
• Servicing Specifications
• Tightening Torques
• Checking, Disassembling and Servicing
All illustrations, photographs and specifications contained in this manual are of the newest
information available at the time of publication.
KUBOTA reserves the right to change all information at any time without notice.
Since this manual includes many models, information or illustrations and photographs can show
more than one model.
© KUBOTA Corporation 2012
TO THE READER
January, 2012
KiSC issued 01, 2012 A