Icom IC-7850 Instruction Manual page 174

Saving the setting data onto an
■
Memory channels and transceiver's settings can be
saved on a card or flash drive.
Saving data settings on a card or flash drive allows
you to easily restore the transceiver to its previous set-
tings, even if an All reset is performed.
Displays the Setting save screen.
q
SET [F-7]  SD/USB [F-7]  SAVE [F-2]
Push [SD/USB](F).
w
• Pushing [SD/USB](F) toggles the file save destination
between the card and flash drive.
Push [SAVE](F).
e
• Opens the confirmation window.
• To cancel saving, push [CANCEL](F).
Push [OK](F).
r
• Saves the data settings to the selected destination.
• While saving to the card, the indicator to the left of the
[SD CARD] slot blinks.
• While saving to the flash drive, the indicator to the right
of the [SD CARD] slot blinks.
• You can change the content to be saved in the Save set
screen. (p. 10-4)
(SET [F-7] > SD/USB [F-7] > SAVE [F-2] >
SAVE Contents)
• After saving, returns to the SD/USB-Memory set
screen.
USING AN SD CARD OR USB FLASH DRIVE
SD card or USB flash drive
• SD/USB-Memory set screen
• Setting save screen
Destination is an SD card
• Confirmation window
10-5
10