Replacing The Filter - Eiki EK-610UA Owner's Manual

Replacing the Filter

The interval of the filter replacement is affected by the dustiness. Check the filters periodically for better
performance.
Note:
Dirty filter may reduce the air flowing into the projector and the temperature in the projector may rise
as the result. This may activate the protection mechanism or damage the components.
Important:
Check, clean, and replace the filter periodically.
Perform the following to replace the filter:
1.
Turn the projector off. Allow the projector to cool down into standby mode.
2.
Release the screws on the dust filter cover
3.
Pull out the filter cover and replace the filter
4.
Install the new filter to the projector by reversing the previous steps.
Note:
Part number of the Filter: 51.8SG09G001.
.
A
.
B
A
59
— —
DLP Projector — Owner's Manual
B