Power Settings Menu - Eiki EK-620UA Owner's Manual

Power Settings Menu

Press the Menu button to open the OSD menu. Press the arrow keys (pq) to select OPTION and press
the Enter button to enter the OPTION menu. Press the arrow keys (pq) to select Power Settings and
press the Enter button to enter the Power Settings menu. Press the arrow keys (pq) to select the menu
option and press the Enter button to enter its submenu. Press the arrow keys (pqtu) to select or adjust
the desired settings and press the Enter button to confirm.
Item
Standby Power Mode
Direct Power On
Auto Power Off
Sleep Timer
PICTURE
Standby Power Mode
Direct Power On
Auto Power Off
OUTPUT
Sleep Timer
SETUP
OPTION
Set the standby power mode.
• 0.5W mode: The projector is in standby mode when connected to AC
power. (<0.5W)
• Communication mode: The projector could be controlled via the LAN
terminal during power standby.
The projector automatically turns on when electrical power is connected.
Automatically turns the projector off after no signals are detected for
a preset number of minutes. If an active signal is received before the
projector powers down, the image will be displayed.
This item allows the projector to automatically power off after it has been on
for a specified amount of time.
DLP Projector — Owner's Manual
Power Settings
Description
45
— —
Communication mode
Off
20 Mins
No