Power Settings Menu - Eiki EK-610U Owner's Manual

Power Settings Menu

Press the Menu button to open the OSD menu. Press the arrow keys (pq) to select OpTIOn and press
the Enter button to enter the OpTIOn menu. Press the arrow keys (pq) to select power Settings and
press the Enter button to enter the power Settings menu. Press the arrow keys (pq) to select the menu
option and press the Enter button to enter its submenu. Press the arrow keys (pqtu) to select or adjust
the desired settings and press the Enter button to confirm.
I
tem
Standby Power Mode
Direct Power On
Auto Standby
Auto Sleep
pICTURE
Standby Power Mode
Direct Power On
Auto Standby
OUTpUT
Auto Sleep
SETUp
OpTIOn
Set the standby power mode.
• 0.5W mode: The projector is in standby mode when connected to AC
power. (<0.5W)
• Communication mode: The projector could be controlled via the LAN
terminal during power standby.
The projector automatically turns on when electrical power is connected.
Automatically switch the projector to standby mode after no signals are
detected for a preset number of minutes. If an active signal is received, the
projector reactivates and displays the image.
Automatically switch to sleep mode after it has been on for a specified
amount of time.
DLP Projector — Owner's Manual
power Settings
D
escrIptIon
43
— —
Communication mode
Off
20 Mins
No