Table of Contents
Advertisement
Settings Menu
Press the Menu button to open the OSD menu. Press the arrow keys (pq) to select Settings and press
the Enter button to enter the Settings menu. Press the arrow keys (pq) to select the menu option
and press the Enter button to enter its submenu. Press the arrow keys (pqtu) to select or adjust the
desired settings and press the Menu button to exit.
Item
Language
Menu Location
Standby Power Mode
Test Pattern
Direct Power On
Hot-Key Settings
Reset to Default
Service
Language
Menu Location
Standby Power Mode
Test Pattern
Direct Power On
Hot-Key Settings
Reset to Default
Service
Select
This item allows you to select an available language for the OSD display.
Set up the on-screen display menu location.
Set the standby power mode.
•
0.5W mode: The projector is in standby mode when connected to AC
power. (<0.5W)
•
Communication mode: The projector could be controlled via the LAN
terminal during power standby.
Choose the desired internal test pattern to display or press the Pattern
button on the remote control to select internal test pattern.
The projector automatically turns on when electrical power is connected.
Assign a different function to the hot-key on the remote control by
highlighting the function in the list. Choose a function that does not already
have a dedicated button, and assign the hot-key to that function, allowing
you to quickly and easily use the chosen function.
Restore all settings to their default value. It will not reset network.
WARNING: After resetting, lens calibration is necessary.
For service only.
37
—
DLP Projector — Owner's Manual
Settings
English
Communication mode
Checkerboard
Off
Blank Screen
Enter
Exit
Description
—
Advertisement
Table of Contents
