Remote Settings - Eiki EK-450U Owner's Manual

Remote Settings

Press the [Menu] button to open the OSD menu. Press the [p]/[q] button to select Setup and press the
[Enter] button to enter the Setup menu. Press the [p]/[q] button to select Remote Settings and press
the [Enter] button to enter the Remote Settings menu. Press the [p]/[q] button to select the menu option
and press the [Enter] button to enter its submenu. Press the [p]/[q]/[t]/[u] button to select or adjust the
desired settings and press the [Enter] button to confirm.
I
tem
IR Function
Remote Code
F1/F2/F3
Setup Remote Settings
IR Function
Remote Code
F1
F2
F3
IR Function: Set the IR function setting.
• Off: Choose "Off", the projector can't be operated by the remote control.
By selecting "Off", you will be able to use the keypad buttons.
• On: Choose "On", the projector can be operated by the remote control
from the top and front IR receivers.
Press the [t]/[u] button to select desired number or the same number as
the Remote ID for the projector.
For the Remote control setting, see "Remote Control Code" at page 11.
Assign the default function for F1, F2, or F3:
Brightness, Contrast, Sleep Timer, Color Matching, Color Temperature,
Gamma, Auto Source, Projection Mode, and Lens Shift.
41
—
DLP Projector — Owner's Manual
ON
Brightness
Contrast
Lens Shift
D
escrIptIon
—