Installation Environment - Canon BJ-W3000 Service Manual

VIII. INSTALLATION
ENVIRONMENT
Avoid the following when choosing a
location for the printer.
• Places with a large amount of dust
• Unstable location
• Uneven floor
• Non-horizontal surface
• Direct sun light (use curtains if placed
nearby a window).
• Low temperature and humidity or high
temperature and humidity (temperature
should be in the range of 15 - 30°C and
the humidity 20 - 80%. Particularly
avoid locations near water taps, water
heaters, humidifiers and refrigerators.)
1405mm
installing the machine.
and inspection, as illustrated below.
1170mm
CHAPTER 1. GENERAL DESCRIPTION
• Locations where there might be alcohol,
thinner, etc. nearby.
• Places where temperature or humidity
fluctuates often.
• Air from an air conditioning system or
electric fan directly blowing on the
machine.
Be cautious about the following when
• Adjust the media so as not to touch the
floor, to prevent it from picking up dust
or dirt. Explain to the client that the
floor near the printer should be cleaned
carefully.
• The stand rollers should all sit flat on the
floor.
• Provide a properly grounded electrical
connection.
Secure sufficient space for maintenance
Figure 1-801
800mm
600mm
600mm
600mm
1–41