Printing; Paper Thickness Adjustment Lever - Canon BJ-W3000 Service Manual

E. Paper Thickness Adjustment
Lever
When printing, depending on the print
media used or its thickness, the paper may
become wavy, causing it to rub the head.
To prevent this, the distance between the
head and platen can be adjusted in 3 stages
using the paper thickness adjustment lever.
1) Press the left or right arrow key in the
offline or pause state.
• The carriage moves to the cartridge
replacement position.
2) Open the front cover.
3) Move the paper thickness adjustment
lever to adjust the head-to-platen distance.
: Standard position
: Set to this position when printing
high-density graphics. (graphic
position)
: Set to this position if the paper still
rubs the head after being set to the
graphic position.
CHAPTER 1. GENERAL DESCRIPTION
Figure 1-309
4) Close the front cover.
• The carriage returns to the home
position.
CAUTION
• Better print quality can be obtained by
narrowing the head-to-platen distance.
Place the paper thickness adjustment
lever in standard position except when
the paper rubs the head.
REFERENCE
After moving the paper thickness
adjustment lever, carry out the "Auto
adjust" of the "Adjustment" menu.
Paper thickness
adjustment lever
1–31