Table of Contents
Advertisement
CHAPTER 1. GENERAL DESCRIPTION
V. SIMM
REPLACEMENT
A. About SIMM
The printer's memory can be increased. If
the memory available is not sufficient for the
print data, the memory capacity of the printer
can be expanded by installing new (or large)
SIMMs.
Proper installation of SIMMs can be
confirmed by selecting "Information" of
"System setting" of the main menu. The
following message will be displayed:
Memory
where, "XX" indicates the memory capac-
ity of any installed SIMMs.
• SIMM type
Use SIMMs with the following specifi-
cations:
Capacity: 4, 8, 16, or 32 MB
No. of pins: 72
Access speed: 60ns or faster
FPM (high speed page mode) compatible
No parity
EDO memory can be also used but it is
operated as FPM memory.
Two SIMMs can be added, so that the
memory capacity can be increased by up to
72MB, with the standard memory.
1–36
XX+8 MB
CAUTION
• When handling SIMMs, be careful
to avoid static electricity discharge.
• Before installing the SIMM, be
sure to turn off the printer power.
• Install the SIMMs using the correct
procedure.
B. SIMM Installation
1) Using the installation tools supplied with
printer, remove the 4 screws [1], and
remove the cover plate [2].
[2]
[1]
Figure 1-501
2) Holding both ends of the SIMM with it
centered in the expansion slot, insert it
from the right.
Figure 1-502
Advertisement
Chapters
Table of Contents
