Removing The Waste Ink Absorber Unit - Canon BJ-W3000 Service Manual

2. Removing the waste ink absorber
unit
1) Remove the right cover
2) Remove the lower cover
3) Remove the tube clamp [1] and discon-
nect the waste ink tube from the pipe [2].
[3]
[1]
Figure 3-305
4) Cap the pipe [2] and the waste ink tube
with the waste ink tube cap [3].
[2]
[3]
Figure 3-306
(See page 3-7).
(See page 3-8).
[2]
[2]
CHAPTER 3. MECHANICAL SYSTEM
5) Remove 2 screws [4].
Figure 3-307
6) Remove 2 screws [5] and remove the
waste ink absorber unit [6].
Figure 3-308
CAUTION
When replacing the waste-ink absorber
unit, be sure to reset the waste-ink counter.
(For details, see "Chapter 5 II.C.2 Waste
ink counter reset" (P. 5-11).)
[4]
[6]
[5]
3–23