Removing The Engine Controller - Canon BJ-W3000 Service Manual

2. Removing the engine controller

CAUTION
When replacing the engine controller,
see "Chapter 5 II. C. 3. Replacing the
image controller and engine controller"
(P. 5-11).)
1) Remove the image controller
32).
2) Remove 12 connectors [1] (J201, J202,
J203, J204, J206, J207, J208, J210, J211,
J212, J213, J214) and remove 3 screws
[2].
3) Remove 2 stays [3] and 2 washers [4] and
remove the engine controller [5].
[4]
[2]
[1]
[1]
[5]
Figure 3-603
(See page 3-
[3]
[2]
[1]
[1]
[2]
[1]
CHAPTER 3. MECHANICAL SYSTEM
3–33