Canon BJ-W3000 Service Manual page 35

CHAPTER 1. GENERAL DESCRIPTION
c. Rotation
[Default: 0°]
Data can be rotated on the paper when
printed.
• Auto (cut paper only)
Rotated according to the loaded paper.
• 0°
Prints without rotating
• 90°
Rotated 90° counterclockwise.
• 180°
Rotated 180° counterclockwise.
• 270°
Rotated 270° counterclockwise.
d. Y-mirror
[Default: Off]
The data can be reversed in the paper feed
direction when printing.
• Off
File is not reversed laterally.
• On
File is reversed laterally.
1–22
e. Layout Size (roll media only)
[Default: ISO A]
Paper size can be set.
• ISO A
• ISO B
• JIS B
• ANSI
• ANSI ARCH
• ISO Over
• EURO-DIN
• KOREAN
• Custom
f. User Size (roll media only)
Width and length of paper to be printed
can be set.
[Default: A0 model: 84.1 x 118.9 cm
A1 model: 59.4 x 84.1 cm]
• Width
Width can be set from 8.0 to 62.7
(91.4)cm, in one mm units.
• Length
Length can be set from 8.0 to 1800cm,
in one mm units.
g. Nesting Timer (roll media only)
[Default: 30 seconds]
Time until printing is started can be se-
lected for the nesting layout operation.
• 30 sec., 1 min., 2 min., 5 min., 10
min., 30 min., 60 min.