CHAPTER 3. MECHANICAL SYSTEM
3. Installing the paper feed motor
1) Install the paper feed motor on the motor
side board, pushing down the front of the
paper feed motor in the direction shown in
Figure 3-506, and tighten 3 screws [1].
Figure 3-506
CAUTION
In order to keep the platen flat, be sure
to install the paper feed motor as de-
scribed above.
3–30
4. Fastening the paper feed roller set
a. When the marks are aligned between
1) Match the marks on the paper feed motor
2) Tighten 2 set screws [1] and [2] close to
[1]
3) Tighten the remaining screw [3] firmly.
screws
the set screw positions
side and paper feed roller side.
the marks firmly.
paper feed motor side
[1]
[3]
paper feed roller side
Figure 3-507
CAUTION
In order to assure paper feeding accu-
racy, be sure to follow the above se-
quence.
Marking
[2]