Fan - Canon BJ-W3000 Service Manual

CHAPTER 3. MECHANICAL SYSTEM
3) Remove 3 connectors [3] (CN701,
CN702, CN704) from the operation panel
and take off the operation panel [2].
[2]
Figure 3-110
CAUTION
To prevent the heads from drying out,
return the carriage promptly to the
capping position upon completion of the
work and close the front cover.
3–10
C. Fan
1. Removing the cooling fan
1) Remove the image controller
32).
2) Remove the engine controller
[3]
3-33).
3) Remove the right cover
4) Open the front cover, and holding the
green part, move the carriage to the
center.
5) Remove 1 screw [1] and peel off the noise
protection sheet [2].
(See page 3-
(See page
(See page
[2]
Figure 3-111
3-7).
[1]