CHAPTER 3. MECHANICAL SYSTEM
3. Installing the carriage belt
CAUTION
Install the carriage belt so that the belt
stopper and the carriage belt joint
surfaces are as shown in the figure
below.
OK
OK
Figure 3-208
3–16
1) Matching the belt stopper [1] and carriage
2) Pull the carriage belt in the direction
NG
NG
NG
belt [2], insert the belt stopper into the
hole at the back side of the carriage.
shown in the figure below and check that
the belt stopper has been correctly in-
stalled.
[1]
[2]
Figure 3-209