III. PURGE UNIT
CAUTION
• Do not touch the wiper or caps.
• Since waste ink accumulates on the
bottom of the purge unit, hold the
sides of the purge unit when removing
it.
• Be careful not to spill the waste ink.
1. Removing the purge unit
1) Remove the right cover
2) Open the front cover, and holding the
green part, move the carriage to the
center.
3) Remove the tube clamp [1] and discon-
nect the waste ink tube from the pipe [2].
[3]
[1]
Figure 3-301
(See page
3-7).
[2]
CHAPTER 3. MECHANICAL SYSTEM
4) Cap the pipe [2] and the end of the waste
ink tube [2] using the waste ink tube caps
[3].
[2]
[3]
Figure 3-302
[2]
3–21