Canon BJ-W3000 Service Manual page 30

CAUTION
In the draft mode, the ink may not
dry, depending on the environment.
Set the drying time as required.
REFERENCE
Drying time for each media type is as
follows:
• Plain paper:
• Coated paper: none
• Tracing paper: 2 min.
• Film:
[8] Emulation
[Default: Auto Sense]
Emulation can be set to match the file type
output from the computer.
• Auto Sense
HP-GL/2+RTL, HP RTL, HP-GL, and
TIFF data is automatically detected and
printed.
• HP-GL/2+RTL
Emulates HP-GL/2 and HP-RTL. Data
is accumulated in the memory buffer
and printing is started with the EOP
command, or when the EOP timer times
out.
30 sec.
7 sec.
CHAPTER 1. GENERAL DESCRIPTION
• HP RTL
Should only be used when printing
raster data. After the raster data is
received and 1 band is analyzed, print-
ing is started.
• HP-GL (759x)
Conforms to the HP-759X series
format.
[9] Pen Setup
Composed of the pen setup selection
menu, pen table changing menu, and pen
table initialization menu.
a. Select Table
[Default: Software]
Specifies whether to use the setting desig-
nated by the software or the pen table setting.
• Software
Pen setup from the application is
used. (See Table 1-305.)
• Pen Table (1 to 3)
Pen setup (pen table) stored in the
printer can be used. (See Table 1-304.)
1–17