Installation Site; Installation Environment - Canon Laser Shot LBP3200 Getting Started Manual

Installation Site

Installation Environment

To operate this printer safely and comfortably, install this printer in a place that
meets the following conditions.
IMPORTANT
Before installing the printer, be sure to read "Important Safety Instructions"
in the User's Guide.
● Use power supplies rated for voltages in the following ranges.
120 V 50/60 Hz (±2 Hz)
220 - 240 V (±10 %) 50/60 Hz (±2 Hz)
● The maximum power consumption for the printer is 750W or below for 220 -
240 V model (710W for 120 V model). Electrical noise or a dramatic drop in
power voltage may result in a faulty operation or loss of data in the printer and
computer.
● Use the printer where the temperature and humidity are in the following
ranges.
Ambient temperature: 7.5 to 32.5 °C (45.5 to 90.5 °F)
Humidity: 5 to 90 % RH (no condensation)
IMPORTANT
Condensation may occur in the printer in the following situations. Leave
the printer in a new environment for over one hour before it is used so that
the printer can get accustomed to the ambient temperature and humidity. If
condensation occurs in the printer, it may cause misfeeds, resulting in
paper jams, or printer malfunctions and breakdown.
- When the room where the printer is installed is heated suddenly
- When the printer is moved from a cool and dry area to a hot and humid
area
NOTE
To customers using an ultrasonic humidifier
Impurities contained in tap water or well water are emitted from an
ultrasonic humidifier. Impurities accumulated in the printer may result in
printer malfunctions. If an ultrasonic humidifier is used in the same room
as the printer, use pure water or water that does not contain impurities.
● Install the printer in the following environment.
• A place where sufficient space can be secured
• A well-ventilated room
• A flat surface
• A sturdy platform that can easily tolerate the weight of the printer
WARNING
Do not install the printer near alcohol, paint thinner, or other
flammable substances. If flammable substances come into contact
with electrical parts inside the printer, it may result in a fire or
electrical shock.
CAUTION
•
Do not install the printer in the following areas, as it may result in a
fire or electrical shock.
- A damp or dusty location
- A location exposed to smoke and steam such as near stoves and
humidifiers
- A location exposed to rain or snow
- A location near water faucets or water
- A location exposed to direct sunlight
- A location subject to high temperatures
- A location near open flames
•
Do not install the printer in unstable locations, such as unsteady
platforms or inclined floors, or in locations subject to excessive
vibrations as this may cause the printer to fall or tip over, resulting in
personal injuries.
IMPORTANT
Do not install the printer in the following areas, as this may cause printer
malfunctions.
- An environment where the temperature and/or humidity can change
dramatically, or where condensation occurs
- A poorly ventilated room
- Near devices that generate magnetic or electromagnetic waves
- In rooms such as laboratories where chemical reactions occur
- In a room where corrosive or poisonous chemicals such as salt or
ammonia are present in the air
- A platform that may warp from the weight of the printer, or where the
printer is liable to sink (such as on a carpet or mat)
3