CHAPTER 3. MECHANICAL SYSTEM
VI. ELECTRICAL PART
1. Removing the image controller
CAUTION
When replacing the image controller,
see "Chapter 5 II. C. 3. Replacing the
image controller and engine controller"
(P. 5-11).)
1) Remove 4 screws [1] and remove the
cover plate [2].
[2]
[1]
Figure 3-601
3–32
2) Remove the connector [3] (CN602) and
remove 12 screws [4].
3) Remove the image controller [5].
[5]
[4]
Figure 3-602
[4]
[3]
[4]