Ejecting Paper; For Roll Paper; For Cut Sheet Media - Epson Stylus Pro 7900 User Manual

Epson Stylus Pro 7900/7910/9900/9910

Ejecting Paper

This section explains how to eject paper after
printing.
Note:
When you use the paper basket, see the following
section.
"Using the paper basket and paper guides" on
page 42
When you use optional Auto Take-up Reel Unit, see
the following section.
"Using Auto Take-up Reel Unit (For Epson
Stylus Pro 9900/9910 only)" on page 46

For roll paper

See the following section to cut the roll paper.
"Cutting the roll paper" on page 35

For cut sheet media

A
When printing is complete, the printer
supports the printed media, and PAPER
OUT. LOAD PAPER is displayed on the LCD
panel.
If READY appears on the LCD panel, press
the button to feed the paper.
Caution:
c
Do not press any buttons when the
Power light or the Pause light is flashing.
User's Guide
Paper Handling
B
Press the
Caution:
c
The paper may fall after ejecting. Be sure
to hold the paper to avoid falling and
damaging the paper.
41
button to remove the paper.