Epson Stylus Pro 7900 User Manual page 74

Epson Stylus Pro 7900/7910/9900/9910
K
Screw up the cutter firmly with a cross head
screwdriver.
Note:
Screw up the cutter firmly, otherwise the cut
position may be slightly shifted or skewed.
L
Align the downside of the cover and the
cutter holder, and then press the cover
firmly until it clicks.
M
Install the SpectroProofer Mounter if it was
attached, and then turn the printer on.
The cutter holder moves to the home
position. If the SpectroProofer Mounter is
installed, the following operation (step 14
to 15) is not necessary.
N
Press the button.
User's Guide
Maintenance
O
Make sure the cover is installed, and press
the
74
button.