Epson Stylus Pro 7900 User Manual page 34

Epson Stylus Pro 7900/7910/9900/9910
N
Insert the paper into the insertion slot. Pull
the paper down through the paper
insertion slot so that it comes out below.
Take care not to fold the edge of the paper,
and insert it so that there is no slack.
If you have difficulty feeding the paper,
adjust the paper suction by pressing the
or button. Pull the paper to fit the edge
of the paper to the label position.
O
Close the roll paper cover.
User's Guide
Paper Handling
P
Press the
After a few seconds, the paper moves to the
printing position. When you press the
Q
If ARE THESE SETTINGS OK? appears on the
LCD panel, press the
select NO and then press the
the media type and paper remaining, and
then press the
The previous setting appears on the LCD
panel. If the media type and paper
remaining are correct, select YES and then
press the
R
If the edge of the roll paper has folds, press
the
S
When using the paper basket, set it in the
forward or backward position.
If you are using Epson Stylus Pro
9900/9910, you can also use the optional
Auto Take-up Reel Unit.
See "Using the paper basket and paper
guides" on page 42
See "Using Auto Take-up Reel Unit (For
Epson Stylus Pro 9900/9910 only)" on page
46
34
button.
button, it moves immediately.
or
button to set the media.
button.
button to cut the edge.
button to
button. Set