Epson Stylus Pro 7900 User Manual page 51

Epson Stylus Pro 7900/7910/9900/9910
C
Remove the flange by pinching the knob.
D
Reverse the flange so that the smaller knob
is positioned on the outside, then replace it
on the movable unit by pinching the knob.
User's Guide
Paper Handling
Installing a take-up reel core
The method of installing the take-up reel unit is
the same for both 2-inch and 3-inch reel cores.
A
Make sure that the lock lever is released
(turned to the left). Slide the movable unit
to the left end of the horizontal strut.
B
Slip one end of the take-up reel core over
the flanged knob on the drive unit.
C
Insert the flanged knob on the movable unit
into the other end of the take-up reel core.
51