Epson Stylus Pro 7900/7910/9900/9910
E
Check if there are missing dots on the
nozzle check pattern.
If there are no missing dots, click Finish.
If there are missing dots, click Clean.
After printing a nozzle check pattern, make
sure that the nozzle check pattern printing
is complete before starting to print your
data or cleaning the print head.
Checking the print head nozzles
using the printer's control panel
A
Make sure that roll paper or A4/Letter size
or larger is loaded in the printer.
Select the correct paper source according to
the paper.
See "Paper Handling" on page 30
B
Press the
button to enter the Menu
mode.
C
Press the
/
PRINT, and then press the
User's Guide
Maintenance
button to display TEST
button.
D
Press the
/
CHECK, and then press the
E
Press the
nozzle check pattern.
F
Check the nozzle check pattern.
Good
There are no missing dots so the nozzles are
not clogged.
Bad
There are missing dots so the nozzles are
clogged. Perform head cleaning.
See "Head cleaning" on page 78
77
button to display NOZZLE
button.
button to start printing a