Replacing The Cutter - Epson Stylus Pro 7900 User Manual

Epson Stylus Pro 7900/7910/9900/9910
E
Insert the new maintenance tank into place
as far as it will go.
Caution:
c
Do not touch the green chip on the side of
the maintenance tank. Doing so may
prevent normal operation.
F
For Epson Stylus Pro 9900/9910, repeat
step 3 to 5 to replace the maintenance tank
on the other side.
User's Guide
Maintenance

Replacing the Cutter

When the paper cutter does not cut cleanly, it may
be dull and require replacement. See the
following section for the product code of the
paper cutter that is supported with this printer.
See "Options and Consumable Products" on
page 62
Caution:
c
Take care not to damage the cutter blade.
Dropping it or knocking it against hard objects
may chip the blade.
A
Make sure the printer is on.
If paper is loaded, remove it from the
printer.
B
Press the
mode.
C
Press the
MAINTENANCE, and then press the
D
Press the
REPLACEMENT, and then press the
72
button to enter the Menu
/ button to select
/ button to select CUTTER
button.
button.