Epson Stylus Pro 7900 User Manual page 149

Epson Stylus Pro 7900/7910/9900/9910
For poster printing with margins
When you select Overlapping Alignment Marks,
the following marks are printed on the paper. See
the procedures below to join the four printed
pages together using the alignment marks.
The four sheets are joined together by the
following order.
A
Cut the upper left sheet along the
alignment mark (vertical blue line).
The guide is black for the black-and-white
printing.
User's Guide
Variety of Printings
B
Lay the upper left sheet on top of the upper
right sheet. The X marks should be matched
as in the illustration below, and join the
upper left sheet to the upper right sheet
with cellophane tape temporarily.
C
Cut the upper sheets along the alignment
mark (vertical red line).
The guide is black for the black-and-white
printing.
D
Join the upper left and right sheets together
with cellophane tape on the back of the
sheets.
E
Try step 1 to 4 for the lower sheets.
149